JB4tech.com - International Turbo Tuning Discussion

JB4tech.com - International Turbo Tuning Discussion (https://www.jb4tech.com/forums/index.php)
-   General Tech Support, Tuning Advice, Logs, and Help Me Posts (https://www.jb4tech.com/forums/forumdisplay.php?f=35)
-   -   LPFP upgraded, log review request (https://www.jb4tech.com/forums/showthread.php?t=50365)

LaxIan55 11-10-2017 07:54 AM

LPFP upgraded, log review request
 
2 Attachment(s)
Recently upgraded my LPFP to a Walbro 450. FP_L values are holding much better as I was dropping into the 40's previously.

Here is a log for a map2 and a map 5 run, running about 25% ethanol. Everything look ok? ign values ok? What am I looking for there?

Also, the virtual ethanol sensor doesn't seem to be resetting. Is there a way to reset that value? It was showing mid 50's with only pump gas as well.

Mods:
MHD BEF + Jb4
FBO, no inlets/outlets


Thanks!

Steve @ BMS/Fuel-It! 11-10-2017 08:25 AM

it's a virtual sensor...it has to be calibrated.

Looks pretty good to me.


All times are GMT -7. The time now is 09:24 PM.


Copyright 2007 - 2022, JB4tech.com