View Single Post
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Posts: 34,330
Join Date: Jan 2008
Default 03-07-2017, 08:42 PM

Originally Posted by protecon
Competed in our local annual "airstrip" attack event over the weekend.

Managed 230.14km/h 22.619s for standing start 1000m run.

Logs attached.

Would love to run more fuel (higher ethanol mix) and timing.
Logs look good. I think boost is reflecting false high in logs as you checked off 3.5bar TMAP sensor. But on this specific firmware that should be set to 0 since we're not scaling the output to the JB4 interface beyond 25psi the standard setting.

Also note open loop is set to 0... Raise that to 60 to dramatically lower fuel trims!

Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote